Designed for uncoiling a metal strip coiled in a 2 000 kg roll and up to 350 mm wide. The Expanding of the support bars synchronously by rotation of the handwheel. Equipped with a system to prevent unwinding by inertia.
Line is intended for production of a half-round or shaped gutters from thin-sheet galvanized steel 0,4-0,6 mm of thickness with plastisol or pural coatings. Gutter is one of the elements of the rain ware system responsible for draining rainwater and meltwater from the roofs of buildings.
Dual sided hemming machine is intended for rolling of edges in a single pass from thin-sheet galvanized steel 0,4-0,5 mm of thickness. The machine with stepless width adjustment from 90 mm to 690 mm conveniently via handwheel.
PK series shaping machines are designed for production of “Window trim” profile made of coiled galvanized steel or steel with polymer coating, 0.4 to 0.6 mm thick. The shape rolling is performed in two passes - one side at a time.
Produces roofing panels with single snap lock seam, the distinctive features of which are simple and quick installation of the panel without the use of special tools, hidden mounting system, allow for thermal expansion of the material.
Equipment is intended for production of a gutter from thin-sheet galvanized steel 0,4-0,6 mm of thickness with plastisol or pural coatings. Gutter is one of the elements of the rain ware system responsible for draining rainwater and meltwater from the roofs of buildings.
Manually-operated machine SPR-1250/3-R is used for for slitting and cutting coiled or sheet metal. The maximum steel thickness is 0.8 mm, 1250 mm useful working width. Light weight and small size of the machine allow transporting it in a car and using it in any place. No specially prepared site, room or electric power is necessary for the machine operation.
The pattern slitting process is carried out manually, by rotating the handle fixed on the lower shaft and transmitting the torque to the upper shaft by means of two gear wheels. Slitting is performed when the blank passes between disk cutters, which are overlapped with each other (disk pair). The quantity of disk cutters installed on the shaft depends on metal thickness and type. As standard equipped with 3 sets of adjustable cutter blades.
The disk cutter is fixed on the shaft by means of retention screws in 2 symmetrically located flattened surfaces (a plane on the shaft). The precise seating of the disk cutters on the shaft and symmetrical arrangement of the retention screws ensure perfect perpendicularity of the disk cutter to the cutting plane, which influences the finished product edge quality directly, and absence of burrs. Rubber bushings installed on the lower shaft improve the metal drawing.
Adjustment for the required thickness by changing the overlapping value between disk cutters by replacing the linings under the upper bearing cages, fixing the upper shaft.
Manual cut by extra roller shear, ensuring the cut metal with thickness up to 0,8 mm. For more comfortable operation of the machine can be equipped with a support stand.
The metal slitting machine capacity is 10 times as high as that of hand tools. It replaces the guillotine completely when sheet metal is cut.
The addition of extra set of cutter blades reduces the cutting capacity when slitting:
* In the photo the machine is presented with additional equipment.
Manual slitting machine SPR-1250/3R от компании Мобипроф - надежное оборудование от производителя. Оформить заказ в городе Ростов-на-Дону вы можете по телефону 8 (800) 333-41-10 или оставив заявку на сайте.